Water Pump - 4.2L: Installation

WARNING: This page is about a different car, the 2002 Ford RV Cutaway, 2002 Ford Econoline, 2002 Ford E550 Super Duty, 2002 Ford E450 Super Duty, and 2002 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse the removal procedure.
- Tighten the stud bolts, and nuts in the sequence shown.
- Install an appropriately sized worm drive-type clamp in place of the constant tension clamp.
  
  Fig 1: Water Pump Bolts/Studs Tightening Sequence
  Courtesy of FORD MOTOR CO.
  
  Fig 2: Installing A/C Support Bracket
  Courtesy of FORD MOTOR CO.
  
  Fig 3: Installing Water Pump Pulley
  Courtesy of FORD MOTOR CO.