LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Manual Transmission & Clutch System - General Information) >> Removal And Installation >> Clutch Pressure Plate Locating Dowels >> Removal

Clutch Pressure Plate Locating Dowels: Removal

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission. For additional information, refer to MANUAL TRANSAXLE/TRANSMISSION .
  2. NOTE: Care should be taken not to damage the dowel holes or the surrounding surface areas during removal.
    Fig 1: Removing Flywheel Dowels
    G03430728Courtesy of FORD MOTOR CO.
  3. Remove the flywheel dowels.