LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 360 (Manual Transmission & Clutch System - General Information) >> Removal And Installation >> Clutch Housing Locating Dowels >> Removal

Clutch Housing Locating Dowels: Removal

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the flywheel. for additional information, refer to CLUTCHES .
  2. NOTE: Care should be taken not to damage the dowel holes or the surrounding surface areas during removal.
    Fig 1: Removing Clutch Housing Locating Dowels
    G03430727Courtesy of FORD MOTOR CO.
  3. Remove the clutch housing locating dowels.