LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Engine - 2.0L ZETEC) >> In-Vehicle Repair >> Oil Level Indicator and Tube >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolt and the oil level indicator and tube.
    Fig 1: Removing Bolt & Oil Level Indicator & Tube
    G03430317Courtesy of FORD MOTOR CO.
  2. To install, reverse the removal procedure.
    • Install a new O-ring seal if damaged.
scientia non olet · About LEMON Manuals