Removal and Installation

WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Drain the power steering fluid into a suitable drain pain.

Fig 1: Disconnecting Power Steering Fluid Return Hose

Courtesy of FORD MOTOR CO.

Disconnect the power steering fluid return hose.
Disconnect the power steering low pressure hose.

Fig 2: Disconnecting Power Steering Low Pressure Hose
Courtesy of FORD MOTOR CO.
Remove the bolts and the power steering pump reservoir.

Fig 3: Removing Bolts And Power Steering Pump Reservoir
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.
- Fill power steering system; refer to STEERING SYSTEM - GENERAL INFORMATION .