LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 349 (Automatic Transaxle/Transmission) >> Diagnosis And Testing >> Diagnosis By Symptom >> Diagnostic Routines >> Shift Concerns: Soft/Slipping 2-1 Shift (Automatic)

Shift Concerns: Soft/Slipping 2-1 Shift (Automatic)

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.
SHIFT CONCERNS: SOFT/SLIPPING 2-1 SHIFT (AUTOMATIC) SPECIFICATION

Possible Component Reference/Action
226 ELECTRICAL ROUTINE   
No electrical concerns 
326 HYDRAULIC/MECHANICAL ROUTINE 
Main Control Valve Body 
  • Bolts out of torque specification
  • Tighten bolts to specification.
  • Gaskets and separator plate-damaged, off location
  • Inspect gaskets for damage. Install new components as necessary.
  • Solenoid valves, springs, clips-loose, stuck, missing, incorrectly assembled
  • Inspect. Install new components as necessary.
2-4 Band 
  • Band loose or incorrectly adjusted
  • Inspect. Adjust as necessary.
2-4 Servo Piston Assembly 
  • Piston seals, springs-damaged, missing
  • Inspect for damage. Install new components as necessary.
1-2 Accumulator Assembly 
  • Piston, spring, bore-damaged
  • Inspect for damage. Install new components as necessary.
Low One-Way Clutch 
  • Worn or damaged
  • Inspect for damage. Install new components as necessary.
scientia non olet · About LEMON Manuals