LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 335 (Instrument Cluster - Conventional) >> Diagnosis And Testing >> Instrument Cluster >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the system.
  2. Visually inspect for obvious signs of mechanical and electrical damage.
    Fig 1: Visual Inspection Chart
    G01439987Courtesy of FORD MOTOR CO.
  3. Verify that the following systems are working correctly.
    • Charging system
    • Fuel system
    • Engine oiling system
    • Engine cooling system
    • Vehicle speed control system
  4. Check the wiring harness for obvious signs of shorts, opens, bad connections, or damage.
  5. If the fault is not visually evident, determine the symptom and proceed to the Symptom Chart.