LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 330 (Fuel Tank & Lines-Natural Gas) >> Removal And Installation >> Solenoid Valve - Fuel Tank >> Removal

Solenoid Valve - Fuel Tank: Removal

WARNING: This page is about a different car, the 2003 Ford Econoline, 2003 Ford E550 Super Duty, and 2003 Ford E450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel tank(s). Refer to the FUEL TANK REMOVAL .
    2. CAUTION: When removing the fuel tank solenoid valve electrical connector, it is possible for the connector pins to disengage from the solenoid valve.
    Fig 1: Removing Fuel Tank Solenoid Valve Electrical Connector
    G01540264Courtesy of FORD MOTOR CO.
  2. Remove the fuel tank solenoid valve electrical connector.
    1. Remove the retaining screws.
    2. Remove the fuel tank solenoid valve electrical connector.
  3. Remove the fuel tank solenoid valve.
    Fig 2: Removing Fuel Tank Solenoid Valve
    G01540265Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals