LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 330 (Fuel Tank & Lines-Natural Gas) >> Removal And Installation >> Sensor - Tank Temperature >> Removal

Sensor - Tank Temperature: Removal

WARNING: This page is about a different car, the 2003 Ford Econoline, 2003 Ford E550 Super Duty, and 2003 Ford E450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the pressure relief - fuel line venting procedure. Refer to FUEL SYSTEM-GENERAL INFORMATION-NATURAL GAS .
  2. Disconnect the battery ground cable.
  3. Raise and support the vehicle.
  4. Remove the tank temperature sensor.
    1. Disconnect the tank temperature sensor electrical connector.
    2. Remove the tank temperature sensor.
    Fig 1: Removing Tank Temperature Sensor
    G01540262Courtesy of FORD MOTOR CO.