Sensor - Fuel Tank Pressure: Removal
WARNING: This page is about a different car, the 2003 Ford Econoline, 2003 Ford E550 Super Duty, and 2003 Ford E450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Perform the pressure relief - fuel line venting procedure. Refer to FUEL SYSTEM-GENERAL INFORMATION-NATURAL GAS .
- Disconnect the battery ground cable.
- Raise and support the vehicle.
- Remove the fuel tank pressure sensor.
- Disconnect the fuel tank pressure sensor electrical connector.
- Remove the fuel tank pressure sensor.
- Remove the fuel tank pressure sensor spacer (if necessary).