Lines - Mid High-Pressure Fuel: Removal

WARNING: This page is about a different car, the 2003 Ford Econoline, 2003 Ford E550 Super Duty, and 2003 Ford E450 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Perform the pressure relief - fuel line venting procedure. For additional information, refer to FUEL SYSTEM-GENERAL INFORMATION-NATURAL GAS .
Disconnect the tank temperature sensor electrical connector.

Fig 1: Disconnecting Tank Temperature Sensor Electrical Connector
Courtesy of FORD MOTOR CO.
Disconnect the mid high-pressure fuel line from the front high-pressure fuel line.

Fig 2: Disconnecting Mid High-Pressure Fuel Line
Courtesy of FORD MOTOR CO.
Disconnect the mid high-pressure fuel line from the rear high-pressure fuel line.

Fig 3: Disconnecting Mid High-Pressure Fuel Line
Courtesy of FORD MOTOR CO.
Disconnect the mid high-pressure fuel line from the fuel filler valve high-pressure fuel line.

Fig 4: Disconnecting Mid High-Pressure Fuel Line
Courtesy of FORD MOTOR CO.
Remove the mid high-pressure fuel line.
1. Remove the P-clip retaining bolt.
2. Remove the mid high-pressure fuel line from the vehicle.
Fig 5: Removing Mid High-Pressure Fuel Line
Courtesy of FORD MOTOR CO.