LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (Automatic Transmission - 4R70W) >> Diagnosis And Testing >> Pinpoint Tests - OSC Equipped Vehicles >> Pinpoint Tests >> Identifying Pinpoint Test D: Electrical Pressure Control (EPC) Solenoid

Identifying Pinpoint Test D: Electrical Pressure Control (EPC) Solenoid

WARNING: This page is about a different car, the 2003 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Pinpoint Test D: Electrical Pressure Control (EPC) Solenoid (D1)
G01539550Courtesy of FORD MOTOR CO.
Fig 2: Identifying Pinpoint Test D: Electrical Pressure Control (EPC) Solenoid (D2-D4)
G01539551Courtesy of FORD MOTOR CO.
Fig 3: Identifying Pinpoint Test D: Electrical Pressure Control (EPC) Solenoid (D4 Cont.-D6)
G01539552Courtesy of FORD MOTOR CO.
Fig 4: Identifying Pinpoint Test D: Electrical Pressure Control (EPC) Solenoid (D7)
G01539553Courtesy of FORD MOTOR CO.
NOTE: Refer to the OUTPUT SHAFT SPEED (OSS) SENSOR HARNESS CONNECTOR  illustration preceding these pinpoint tests.