LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 324 (Engine Accessory Drive) >> Removal And Installation >> Belt Tensioner - 7.3L Diesel >> Removal

Belt Tensioner - 7.3L Diesel: Removal

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive belt idler pulley. For additional information, refer to BELT IDLER PULLEY - 7.3L DIESEL .
  2. Loosen the bolt and remove the drive belt tensioner from the generator mounting bracket.
    Fig 1: Removing Drive Belt Tensioner From Generator Mounting Bracket
    G01538356Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals