LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 316 (Power Steering) >> Removal And Installation >> Power Steering Fluid Cooler - E150-E550 >> Removal

Power Steering Fluid Cooler - E150-E550: Removal

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission fluid cooler; for additional information, refer to TRANSAXLE/TRANSMISSION COOLING .
  2. Disconnect the hoses at the fluid cooler.
    Fig 1: Disconnecting Hoses At Fluid Cooler
    G01439713Courtesy of FORD MOTOR CO.
  3. Remove the two power steering cooler bolts and remove the power steering cooler.
    Fig 2: Removing Power Steering Cooler
    G01439714Courtesy of FORD MOTOR CO.