LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 315 (Drive Axle/Differential - 8.8-Inch Ring Gear) >> In-Vehicle Repair >> Differential Housing Cover >> Removal

Differential Housing Cover: Removal

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
    2. NOTE: Empty the lubricant into a clean container for reuse.
  2. Remove the differential housing cover (4033).
  1. Remove the 10 differential housing cover bolts (4346) and drain the lubricant from the rear axle housing (4010).
  2. Remove the differential housing cover.
Fig 1: Removing Differential Housing Cover
G01440431Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals