LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 310 (Rear Drive Axle/Differential - Ford 9.75-Inch Ring Gear -- F150) >> In-Vehicle Repair >> Differential Housing Cover >> Removal

Differential Housing Cover: Removal

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
    2. NOTE: Empty the lubricant into a clean container for reuse.
  2. Remove the differential housing cover (4033).
    1. Remove the 12 differential housing cover bolts, and drain the lubricant from the rear axle housing (4010).
    2. Remove the differential housing cover.
      Fig 1: Draining Lubricant From Rear Axle Housing
      G02195867Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals