General Specifications
WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Ford 8.8-Inch Ring Gear General Specifications
| Item | Specification |
|---|---|
| SAE75W-140 High Performance Rear Axle Lubricant F1TZ-19580-B | WSL-M2C192-A |
| Additive Friction Modifier C8AZ-19B546-A | EST-M2C118-A |
| Premium Long-Life Grease XG-1-C | ESA-M1C75-B |
| Sealant | |
| Silicone Rubber D6AZ-19562-AA | ESB-M4G92-A or ESE-M4G195-A |
| Threadlock and Sealer EOAZ-19554-AA | WSK-M2G351-A5 |
| Adhesive | |
| Stud and Bearing Mount EOAZ-19554-BA | WSK-M2G349-A1 |
| Clearance, Tolerance and Adjustments nun (Inch) | |
| Maximum backface ring gear runout | 0.102 (0.004) |
| Differential case maximum runout | 0.076 (0.003) |
| Maximum axle shaft end play | 0.762 (0.030) |
| Backlash between ring gear and pinion teeth | 0.203-0.381 [0.305-0.381 preferred] (0.008-0.015 [0.012-0.015 preferred]) |
| Ring gear maximum backlash variation between teeth | 0.102 (0.004) |
| Pinion maximum runout | 0.25 (0.010 T.I.R.) |
| RABS sensor air gap | 0.127-1.143 (0.005-0.045) |