Tubes - 2.5L: Removal

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Raise the vehicle on a hoist.
Disconnect the fluid cooler inlet tube (7A030) and the fluid cooler tube (7A031) from the radiator (8005).

Fig 1: Disconnecting Fluid Cooler Inlet & Fluid Cooler Tube From Radiator
Courtesy of FORD MOTOR CO.
Disconnect the fluid cooler inlet tube and the fluid cooler tube from the transmission

Fig 2: Disconnecting Fluid Cooler Inlet Tube & Fluid Cooler Tube From Transmission
Courtesy of FORD MOTOR CO.
Remove the transmission fluid cooler line clip, the fluid cooler inlet tube and the fluid cooler tube.

Fig 3: Removing Transmission Fluid Cooler Line Clip
Courtesy of FORD MOTOR CO.