LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 300 (Automatic Transmission) >> In-Vehicle Repair >> Transmission Insulator and Retainer >> Removal

Transmission Insulator and Retainer: Removal

WARNING: This page is about a different car, the 2003 Mercury Marauder, 2003 Mercury Grand Marquis, and 2003 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission support crossmember. For additional information, refer to TRANSMISSION SUPPORT CROSSMEMBER .
  2. Remove the transmission support insulator.
    Fig 1: Removing Transmission Support Crossmember
    G01608381Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
    Fig 2: Installing Transmission Support Crossmember
    G01608382Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals