LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 300 (Automatic Transmission) >> Diagnosis And Testing >> Pinpoint Tests - OSC Equipped Vehicles >> Pinpoint Test D: Electrical Pressure Control (EPC) Solenoid

Pinpoint Test D: Electrical Pressure Control (EPC) Solenoid

WARNING: This page is about a different car, the 2003 Mercury Marauder, 2003 Mercury Grand Marquis, and 2003 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to the TRANSMISSION INTERNAL HARNESS CONNECTOR  preceding these pinpoint tests.
NOTE: Read and record all DTCs. All Digital TR Sensor and VSS DTCs must be repaired before entering Output State Control (OSC).
Fig 1: Pinpoint Test D: Electrical Pressure Control (EPC) Solenoid (1 Of 3)
G01608156Courtesy of FORD MOTOR CO.
Fig 2: Pinpoint Test D: Electrical Pressure Control (EPC) Solenoid (2 Of 3)
G01608157Courtesy of FORD MOTOR CO.
Fig 3: Pinpoint Test D: Electrical Pressure Control (EPC) Solenoid (3 Of 3)
G01608158Courtesy of FORD MOTOR CO.