LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 299 (Front Drive Axle/Differential - Ford 8.8-Inch -- F150) >> Removal And Installation >> Bushing-Tube >> Removal

Removal And Installation: Bushing-Tube: Removal

WARNING: This page is about a different car, the 2002 Ford Pickup, 2001 Ford Pickup, and 2000 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front drive axle assembly. Refer to the AXLE ASSEMBLY-Front Drive .
  2. Position the tube bushing removal tools.
    1. Position the Bushing Cup Remover/Replacer.
    2. Position the Drawbolt.
    3. Thread the Bushing Remover on the Drawbolt.
      Fig 1: Positioning Tube Bushing Removal Tube
      G02187110Courtesy of FORD MOTOR CO.
  3. Tighten the Drawbolt to remove the tube bushing.
    Fig 2: Removing Tube Bushing
    G02187111Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals