Removal And Installation: Bushing-Cover: Removal

WARNING: This page is about a different car, the 2002 Ford Pickup, 2001 Ford Pickup, and 2000 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front drive axle assembly. Refer to the AXLE ASSEMBLY-Front Drive .
Position the cover bushing removal tools.
1. Position the Bushing Remover Adapter.
2. Position the Bushing Cup Remover/Replacer.
3. Position the Drawbolt.
4. Thread the Bushing Remover on the Drawbolt.
  
  Fig 1: Positioning Cover Bushing Removal Tool
  Courtesy of FORD MOTOR CO.
Tighten the Drawbolt to remove the cover bushing.

Fig 2: Tightening Drawbolt To Remove Cover Bushing
Courtesy of FORD MOTOR CO.