DTC P0335: Crankshaft Position Sensor A Circuit
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
P0335 - CRANKSHAFT POSITION SENSOR A CIRCUIT
| Description: | The powertrain control module (PCM) continuously monitors this sensor for concerns. This DTC sets when the PCM detects that the crankshaft position (CKP) sensor signal is missing for greater than a calibrated number of camshaft revolutions. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An inactive CKP signal causes a no start condition. Monitor the RPM PID while cranking the engine. A value of 0 RPM indicates a CKP concern. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST JD . | ||