LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2789 (Engine Controls - Powertrain DTC Charts & Descriptions - DTC P0218 Through DTC P0581 - (Except Diesel & Hybrid)) >> DTC P0234: Turbocharger/Supercharger A OVERBOOST Condition

DTC P0234: Turbocharger/Supercharger A OVERBOOST Condition

WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
P0234 - TURBOCHARGER/SUPERCHARGER A OVERBOOST CONDITION

Description:  The powertrain control module (PCM) continuously monitors the turbocharger system for an overboost condition. The PCM checks for a maximum throttle intake pressure (TIP) PID reading during engine operation, which indicates an overboost condition. This DTC sets when the PCM detects that the actual throttle intake pressure is greater than the desired throttle intake pressure by 27.6 kPa (4 psi) or more for 5 seconds.
Possible Causes: 
  • Damaged turbocharger (TC) wastegate regulating valve solenoid
  • Damaged wastegate adjusting rod
  • TC wastegate regulating solenoid valve stuck
  • Wastegate stuck closed
  • Wastegate control hose open or plugged
  • Incorrect wastegate adjustment
Diagnostic Aids:  Check tubing for obstructions, cracks and incorrect fitting connections.
Check the turbocharger wastegate regulating valve solenoid for correct operation.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST HN .