DTC P0191: Fuel Rail Pressure Sensor A Circuit Range/Performance
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
P0191 - FUEL RAIL PRESSURE SENSOR A CIRCUIT RANGE/PERFORMANCE
| Description: | The comprehensive component monitor (CCM) checks the fuel rail pressure (FRP) sensor for an acceptable fuel pressure. The test fails when the difference between the fuel rail pressure requested by the PCM and the fuel rail pressure delivered exceeds 138 kPa (20 psi) for greater than 8 seconds. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DD . | ||