LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2771 (Engine Controls - Pinpoint Test KE: Idle Air Control (IAC) Valve Through Pinpoint Test QA: Unable To Activate Self-Test/Network Communication Error/DTC P1001 - CNG, Flex-Fuel & Gasoline) >> Pinpoint Test KJ: Supercharger Bypass Control >> Introduction >> Notes

Pinpoint Test KJ: Supercharger Bypass Control: Introduction: Notes

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2004 Mercury Sable, 2004 Mercury Mountaineer, 2004 Mercury Monterey, 2004 Mercury Marauder, and 2004 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This pinpoint test is intended to diagnose the following:
  • Supercharger (boost) bypass solenoid (9H465) (part name is: thermactor air control solenoid/vacuum valve assembly).
  • Vacuum reservoir assembly (9J442).
  • Vacuum Hoses.
  • Harness circuits: SCBC, VPWR and PWRGND.
  • Powertrain control module (PCM) (12A650).
  • Supercharger assembly (including the supercharger bypass actuator) (6F076).
Fig 1: Supercharger Bypass Control Vacuum Diagram
G03626755Courtesy of FORD MOTOR CO.
Fig 2: Identifying Super Charger Bypass Control (SCBC) Solenoid Connector
G03626756Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals