LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2769 (Engine Controls - Pinpoint Test Hd: Misfire Detection Monitor Through Pinpoint Test HY: Generator/Regulator System - CNG, Flex-Fuel & Gasoline) >> Pinpoint Test HU: Intake Air Systems >> Introduction >> Intake Air System

Intake Air System

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2004 Mercury Sable, 2004 Mercury Mountaineer, 2004 Mercury Monterey, 2004 Mercury Marauder, and 2004 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Intake Air System Components
G03626705Courtesy of FORD MOTOR CO.
VEHICLE IMRC OFF IMRC ON
BASE 2.5 0
Focus, 2.0L 5 0
Focus, 2.3L 0 5
F-150, 5.4L 5 0
Fig 2: Identifying Intake Manifold Runner Control (IMRC) Actuator Connector (1 Of 2)
G03626706Courtesy of FORD MOTOR CO.
Fig 3: Identifying Intake Manifold Runner Control (IMRC) Actuator Connector (2 Of 2)
G03626707Courtesy of FORD MOTOR CO.

For most vehicles the IMRCM is integrated into the IMRC connector

Fig 4: Identifying Intake Manifold Runner Control Monitor (IMRCM) Sensor Connector (1 Of 2)
G03626708Courtesy of FORD MOTOR CO.
Fig 5: Identifying Intake Manifold Runner Control Monitor (IMRCM) Sensor Connector (2 Of 2)
G03626709Courtesy of FORD MOTOR CO.
Fig 6: Intake Manifold Tuning Valve (IMTV) Actuator Connector
G03626710Courtesy of FORD MOTOR CO.
Fig 7: Intake Manifold Tuning Valve (Bank 2) (IMTV2) Actuator Connector
G03626711Courtesy of FORD MOTOR CO.