Removal and Installation
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the luggage compartment lid lock cylinder. For additional information, refer to HANDLES, LOCKS, LATCHES & ENTRY SYSTEMS -- FUSION, MILAN & MKZ article.
- Lift the retaining tabs, turn the switch clockwise and remove the luggage compartment anti-theft inhibit switch (also known as the luggage compartment lid disarm switch).
- To install, reverse the removal procedure.