LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 270 (Air Bag Restraint Systems) >> Removal & Installation >> Front Seat >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2004 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM. Disconnect front seat electrical connectors. Remove nuts, bolts and front seat.
  2. To install, reverse removal procedure. Tighten front seat nuts and bolts to specification. See TORQUE SPECIFICATIONS  . Reconnect battery(s). With air bag simulators installed at all deployable devices, perform system operation check. See SYSTEM OPERATION CHECK  . Disconnect battery(s). Activate air bag system. See ACTIVATING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
scientia non olet · About LEMON Manuals