Crosslink Diagnostic Trouble Codes (Dtcs)
WARNING: This page is about a different car, the 2004 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
When 2 deployable circuits are shorted together, a crosslink DTC will be recorded by Restraint Control Module (RCM). RCM will store lowest priority DTC as a short to ground fault. Crosslink DTC is a stored fault only, and will not be available during on-demand self-test. RCM checks for crosslink DTCs only at startup, so an ignition cycle is needed for any changes to be initiated.