LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2618 (Automatic Transaxle - AISIN Aw21) >> In-Vehicle Repair >> Turbine Shaft Speed (TSS) Sensor >> Removal

Turbine Shaft Speed (TSS) Sensor: Removal

WARNING: This page is about a different car, the 2011 Lincoln MKZ and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the main control valve body. For additional information, refer to MAIN CONTROL VALVE BODY  in this service information.
  2. Remove the bolt and the Turbine Shaft Speed (TSS) sensor.
Fig 1: Locating Turbine Shaft Speed Sensor Bolt
G07785951Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals