LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2618 (Automatic Transaxle - AISIN Aw21) >> Diagnosis And Testing >> Transaxle Connector Layouts >> Transaxle Bulkhead Electrical Connector

Transaxle Bulkhead Electrical Connector

WARNING: This page is about a different car, the 2011 Lincoln MKZ and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Transaxle Bulkhead Electrical Connector Pinout
G07785873Courtesy of FORD MOTOR CO.
CONNECTOR-PIN NUMBER REFERENCE

Pin Number Circuit Function
1 Line Pressure Control (LPC) ground
2 Shift Solenoid B (SSB)
3 LPC signal
4 Torque Converter Clutch (TCC) ground
5 Shift Solenoid A (SSA)
6 NOT USED
7 Transmission Fluid Temperature (TFT) ground
8 TFT
9 TCC signal
10 Shift Solenoid C (SSC) ground
11 SSC signal
12 Turbine Shaft Speed (TSS) sensor signal
13 TSS sensor signal ground
14 Shift Solenoid E (SSE) signal
15 NOT USED
16 Shift Solenoid F (SSF) ground
17 Shift Solenoid D (SSD) signal
18 SSD ground
19 Output Shaft Speed (OSS) sensor signal
20 OSS sensor signal ground
21 SSF signal
22 SSE ground