Exhaust Gas Recirculation (EGR) Vacuum Regulator Solenoid
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2011 Mercury Milan, 2011 Mercury Mariner, 2011 Mercury Grand Marquis, 2011 Lincoln Town Car, and 2011 Lincoln Navigator L. However, it is still accessible from the selected car via links, so may be relevant.
The EGR vacuum regulator solenoid is an electromagnetic device used to regulate the vacuum supply to the EGR valve. The solenoid contains a coil which magnetically controls the position of a disc to regulate the vacuum. As the duty cycle to the coil increases, the vacuum signal passed through the solenoid to the EGR valve also increases. Vacuum not directed to the EGR valve is vented through the solenoid vent to the atmosphere. At 0% duty cycle (no electrical signal applied), the EGR vacuum regulator solenoid allows some vacuum to pass, but not enough to open the EGR valve.
EGR VACUUM REGULATOR SOLENOID DATA
EGR VACUUM REGULATOR SOLENOID DATA REFERENCE CHART
| Duty Cycle (%) | Vacuum Output | |||||
|---|---|---|---|---|---|---|
| Minimum | Nominal | Maximum | ||||
| In-Hg | kPa | In-Hg | kPa | In-Hg | kPa | |
| 0 | 0 | 0 | 0.38 | 1.28 | 0.75 | 2.53 |
| 33 | 0.55 | 1.86 | 1.3 | 4.39 | 2.04 | 6.9 |
| 90 | 5.67 | 19.2 | 6.3 | 21.3 | 6.93 | 23.47 |
| EGR vacuum regulator resistance: 26-40 Ohms | ||||||