Wheel and Tire - Rear: Notes

WARNING: This page is about a different car, the 2004 Lincoln LS and 2003 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Special Tool

Courtesy of FORD MOTOR CO.

If installing a new wheel stud, remove the rear brake disc. For additional information, refer to BRAKE SYSTEM for 2003 models or BRAKE SYSTEM for 2004 models.

Remove the components in the order indicated in the following illustration and table.

TO REMOVE INDIVIDUAL COMPONENTS, ONLY CARRY OUT THE LISTED STEPS

Components	Steps
Wheel & Tire Assembly	1,2
Wheel Stud	1-3

Fig 2: Identifying Figure Symbols

Courtesy of FORD MOTOR CO.

Fig 3: Rear Wheel & Tire

Courtesy of FORD MOTOR CO.

To install, reverse the removal procedure.