LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2579 (Safety Belt System) >> Diagnostic Tests >> Safety Belt System >> Symptom Chart

Symptom Chart

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
Symptom Chart

Condition Possible Sources Action
  • The safety belt warning indicator does not operate
  • Burned-out indicator
  • Circuitry
  • Instrument Cluster (IC)
  • Restraints Control Module (RCM)
  • The safety belt warning chime does not operate
  • Wiring, terminals or connectors
  • Safety belt switch
  • IC
  • RCM
  • The safety belt retractor webbing does not extract or exhibits excessive pressure on the occupant during use
  • Safety belt retractor is in Automatic Locking Retractor (ALR) mode
  • Safety belt retractor binding internally
  • The safety belt retractor webbing does not retract or has excessive slack during use
  • Twisted or incorrectly routed safety belt webbing
  • Safety belt retractor binding internally
  • Preform the appropriate Functional Test and repair as necessary. REFER to Component Test 
 
  • Safety belt retractor
  • The Belt-Minder® feature is inoperative
  • Belt-Minder® feature is deactivated
  • Circuitry