Safety Belt Buckles
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
The front outboard seat safety belt buckles are attached to the front seat tracks and can be serviced separately. The center safety belt and safety belt buckle are attached to the front seat inboard mounting studs and are also serviced separately.
The rear seat safety belt buckles are attached to the floor pan behind the rear seat cushion and can be serviced separately.
Belt Tension Sensor (BTS) - The safety Belt Tension Sensor (BTS) is part of the passenger front safety belt buckle and can only be serviced with a new passenger safety belt buckle. The safety BTS sensor operates as part of the Occupant Classification Sensor (OCS) system on the front passenger seat.