Throttle Body: Removal
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
CAUTION:
The throttle body (TB) must be removed from the vehicle to be cleaned. Do not hold the throttle plate open with any object that could scratch the bore or plate while servicing or cleaning the TB.
- Remove the air cleaner outlet pipe. For additional information, refer to REMOVAL AND INSTALLATION article.
- Disconnect the electronic throttle control and the throttle position (TP) sensor electrical connectors.
- Remove the 4 bolts and the throttle body (TB).
- Discard the TB gasket.