LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2533 (Information Center - Instrumentation, Message Center And Warning Chimes) >> Removal And Installation >> Instrument Cluster (IC) Lens >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The Instrument Cluster (IC) lens and the mask are removed and installed as an assembly.
  1. Remove the IC. For additional information, refer to Instrument Cluster (IC) .
  2. Release the 6 black clips and remove the IC lens/mask assembly.
    3. Fig 1: Instrument Cluster Lens/Mask Assembly Clips
    GF0014482Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals