LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2528 (Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear) >> In-Vehicle Servicing >> Differential Housing Cover >> Removal

Differential Housing Cover: Removal

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Remove the differential housing cover.
    1. Remove the 10 differential housing cover bolts and drain the lubricant from the differential housing.
    2. Remove the differential housing cover.
    3. Fig 1: Removing Differential Housing Cover
    GF0013951Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals