Front Cover: Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Ford Pickup, 2001 Ford Expedition, 2001 Ford Econoline, 2000 Ford Pickup, and 2000 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
To install, reverse removal procedure. Apply sealant at front cover-to-oil pan, cylinder block and valve cover areas. Apply silicone sealant onto keyway of crankshaft damper before installing. Tighten bolts to specification. See Fig 1. See TORQUE SPECIFICATIONS .