LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2466 (Wiper System & Washer System) >> Diagnosis And Testing >> Wipers and Washers >> Pinpoint Tests >> Pinpoint Test H: The Washer Pump is Inoperative >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Under normal operation, the windshield washer pump motor is grounded through internal relays in the wiper motors using circuits CRW24 (GY) and CRW23 (VT/GN). The multifunction switch provides input to the windshield wiper motor through circuit CRW07 (GY/BN) to activate the windshield washer. The windshield wiper motor activates the internal relay and then provides power through circuit CRW24 (GY). When the rear window washer is activated, the internal relay in the rear window wiper motor provides power through circuit CRW23 (VT/GN).

This pinpoint test is intended to diagnose the following: 

scientia non olet · About LEMON Manuals