LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2465 (Automatic Transmission - External Controls - (Hybrid)) >> Removal And Installation >> Selector Lever Knob >> Removal

Selector Lever Knob: Removal

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the selector lever knob trim covers by carefully prying out on the bottom front corners and then pry out on the top front corner and remove the covers.
    Fig 1: Removing Selector Lever Knob Trim Covers
    G06098131Courtesy of FORD MOTOR CO.
  2. Remove the 2 selector lever knob screws and remove the selector lever knob.
    Fig 2: Locating Selector Lever Knob Screws
    G06098132Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals