LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2462 (Parking Aid System - Active Park Assist) >> Removal And Installation >> Active Park Assist Switch >> Removal

Active Park Assist Switch: Removal

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lower instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL FINISH PANEL -- CENTER, MIDDLE .
  2. Disconnect the electrical connector.
  3. Remove the active park assist switch from the lower instrument panel center finish panel.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals