Upper Control Arm, Ball Joint & Bushings: Installation
WARNING: This page is about a different car, the 2004 Ford Ranger, 2003 Ford Ranger, and 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- Install NEW alignment plates and cams. Lower control arm forward pivot bolts must be tightened first with lower control arm at normal ride height.
- To complete installation, reverse removal procedure. Tighten remaining bolts and nuts to specification. See TORQUE SPECIFICATIONS . Check wheel alignment. For 2002, see SUSPENSION SYSTEM-GENERAL INFORMATION article. For 2003, see SUSPENSION SYSTEM-GENERAL INFORMATION article. For 2004, see SUSPENSION SYSTEM-GENERAL INFORMATION article.