LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2454 (Supplemental Restraint System) >> Diagnosis And Testing >> Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) >> Principles of Operation >> Restraints Control Module (RCM) >> Event Notification Signal

Event Notification Signal

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The purpose of the deployment event notification feature is to provide other vehicle subsystems with information pertaining to restraint system deployment or fuel cutoff status. Signal communication between the RCM  and fuel pump control module allows the PCM to initiate fuel cut-off to disable the fuel system in the event of a crash.

The RCM  does not monitor the event notification signal circuit for faults and will not set  a DTC if a fault occurs.

scientia non olet · About LEMON Manuals