LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2448 (Hydraulic Brake System Actuation) >> Removal And Installation >> Brake Master Cylinder >> Material

Brake Master Cylinder: Material

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATION

Item Specification
High Performance DOT 3 Motor Vehicle Brake Fluid
PM-1-C (US); CPM-1-C (Canada)
WSS-M6C62-A or WSSM6C65-A1
Fig 1: Brake Master Cylinder Replacement Components With Torque Specifications
G06094477Courtesy of FORD MOTOR CO.
PART DESCRIPTION CHART

Item Part Number Description
1 - Brake fluid level warning switch electrical connector (part of 14290)
2 2140 Brake master cylinder
3 W520212 Brake master cylinder nut (2 required)
4 2152 Brake master cylinder O-ring
5 - Brake tube fittings
6 2C050 Brake fluid level warning switch