LEMON Manuals
: Even more car manuals for everyone
Home
>>
Ford
>>
2000
>>
Contour SE, 2.0 3, Standard
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 2444 (Rear Drive Axle/Differential)
>>
In-Vehicle Repair
>>
Drive Pinion Seal
>>
Special Tool(s)
Special Tool(s)
WARNING:
This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL(S) SPECIFICATION
Courtesy of FORD MOTOR CO.
2 Jaw Puller
205-D072 (D97L-4221-A) or equivalent
Courtesy of FORD MOTOR CO.
Converter Seal Remover
307-309 (T94P-77001-BH)
Courtesy of FORD MOTOR CO.
Holding Fixture, Drive Pinion Flange
205-126 (T78P-4851-A)
Courtesy of FORD MOTOR CO.
Pinion Drive Seal Installer
205-133 (T79P-4676-A)
Courtesy of FORD MOTOR CO.
Slide Hammer
100-001 (T50T-100-A)