Hardwired Inputs
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
The IC requires hardwired inputs from components that are not hardwired to other modules and, therefore, are not on either the High Speed Controller Area Network (HS-CAN) or the Medium Speed Controller Area Network (MS-CAN) but are required for specific IC functions or gateway requirements. The hardwired inputs are provided by the following components:
- Fuel pump module
- PATS transceiver
- Engine oil pressure switch
- Auto-dimming interior mirror
- Message center switch