LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.0 3, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (Charging System - Generators & Regulators - Excursion, F250-F550 Super Duty (Diesel With Single Generator)) >> On-Vehicle Testing >> Generator No-Load Test

Generator No-Load Test

WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, and 2004 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.

Connect a voltmeter positive lead to B+ terminal on generator and negative lead to ground. Start and run engine at 2000 RPM, with all accessories off. Read voltmeter when voltage stabilizes. Voltage should be 13-15 volts. If voltage is not as specified, repair by symptom. See SYMPTOM INDEX  table under SYSTEM TESTS.

scientia non olet · About LEMON Manuals