Special Tool(s)

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

SPECIAL TOOL(S) SPECIFICATION

Courtesy of FORD MOTOR CO.	Axle Bearing Remover 205-193 (T83T-1225-A)
Courtesy of FORD MOTOR CO.	Bearing Cup Replacer 205-278 (T88T-1175-C)
Courtesy of FORD MOTOR CO.	Differential Bearing Cup Replacer 308-153 (T88C-7025-BH)
Courtesy of FORD MOTOR CO.	Drawbar, Rear Axle 205-098 (T75T-1176-A)
Courtesy of FORD MOTOR CO.	Front Hub Remover 205-D070 (D93P-1175-B) or equivalent
Courtesy of FORD MOTOR CO.	Impact Slide Hammer 100-001 (D79P-100-A) or equivalent
Courtesy of FORD MOTOR CO.	Installer, Half Shaft 204-161 (T97P-1175-A)
Courtesy of FORD MOTOR CO.	Pinion Bearing Cone Remover 205-D002 (D79L-4621-A) or equivalent
Courtesy of FORD MOTOR CO.	Receiver Adapter 204-142 (T88C-5493-E)

Fig 1: Exploded View Of Wheel Bearing With Torque Specifications - FWD

Courtesy of FORD MOTOR CO.

PART DESCRIPTION CHART

Item	Part Number	Description
1	1109	Wheel hub
2	1069	Wheel bearing snap ring
3	1225	Wheel bearing
4	2C186	Wheel speed sensor ring
5	W705967	Wheel hub nut